A burst supply line, an overflowing tub, or a storm surge under the back door doesn't wait for business hours, and neither do we. Our Selma-based teams arrive with truck-mount extractors, moisture meters, and drying gear staged and ready to go.
Hirex Water Damage started because homeowners in Selma, TX kept telling us the same story: a national hotline picked up, put them on hold, and then subcontracted the job out to whoever was cheapest and closest. Every technician on our Selma roster is a Hirex Water Damage employee, not a gig-app contractor pulled from a random directory.
Our crew leads carry IICRC water restoration certifications and have logged real hours on Category 1, 2, and 3 losses, so Structural Drying in Selma isn't a side service we tacked on — it's the reason the company exists. We're fully insured and licensed to work anywhere in Selma, TX, so you're protected from the moment our truck pulls into the driveway.
Our Selma, TX-based equipment cache means drying gear is already close by, not stuck in a truck three states away.
Talk to a Selma property manager who's lived through an overnight pipe failure and they'll tell you exactly why a crew that arrives already equipped matters — every extra minute is more water in the framing. That's the gap Hirex Water Damage was built to close, one Selma call at a time.
Water damage doesn't always look dramatic at first — some of the costliest Selma jobs we've handled began as a small, easy-to-miss problem. Here's what tells us a property needs professional attention rather than a mop and a fan:
If you're nodding along to any of these, get ahead of it now rather than later — our Selma dispatcher will give you an honest read on urgency, not a sales pitch.
From a single soaked bedroom to a commercial building with three flooded floors, our Selma teams are equipped to scale up or down — nothing gets a cookie-cutter response.
We arrive with submersible pumps and truck-mount extractors that get standing water out of a Selma property before it soaks deeper into the subfloor. Every extraction job includes moisture mapping so we know exactly which materials are still holding water once the visible flooding is gone.
We place industrial dehumidifiers and air movers based on actual psychrometric calculations, not a standard equipment count per room, with daily drying logs so you can see the numbers improving, not just take our word for it.
For Selma homeowners, that means drywall removal at the flood cut line, subfloor assessment, and content pack-out for anything that can be saved, with clear photo documentation at every stage for your insurance claim.
Selma businesses and property managers get a dedicated project lead, after-hours crews, and equipment scaled to square footage rather than a single-crew response — we know a flooded lobby or a leaking unit above tenants below has to move fast.
Blackwater losses in Selma get handled under strict Category 3 protocol: containment, PPE, antimicrobial application, and documented disposal of contaminated materials.
On top of standard drying, our Selma crews treat affected materials to reduce mold risk and will be upfront if a section needs specialist remediation.
We quote the job before equipment gets plugged in, so there's no surprise line item buried in the final invoice.
Our Selma, TX warehouse keeps drying equipment close, which typically puts a Selma tech at your door inside an hour.
We photograph and log every step specifically so your claim moves faster and you're not the one arguing with the insurance company.
We don't call a job finished until the moisture meter agrees, and if it doesn't, we return at no additional cost.
Our Selma team asks a handful of targeted questions so the truck that shows up already has the right gear loaded.
The closest available technician is routed to your Selma property with equipment staged and ready.
We remove standing water first, then map moisture and position air movers and dehumidifiers based on the readings.
We re-check moisture levels daily until materials hit dry standard, then hand you full documentation for your records or your insurer.
Our Selma technicians use moisture meters at the start and the end of every job, and the final number has to hit the dry standard before we leave. If a callback shows lingering moisture within 30 days of a completed job, we return and correct it at no additional charge.
We put that guarantee directly on the Selma work order, not just in an ad. A repeat visit under this guarantee doesn't mean starting over — we pull the original moisture logs and pick up exactly where the last visit left off.
"Our water heater let go at midnight and a Hirex Water Damage tech was pulling water out of the hallway by 1am. Fast doesn't begin to cover it." — Danielle R.
"The team handled every conversation with my adjuster — I never had to explain what psychrometrics meant to anyone." — Marcus T.
"The drying logs they left behind actually made sense — I could see the numbers dropping every day until it was done." — Priya S.
"Our restaurant flooded from a line break in the kitchen and they had us back open in three days flat." — Aaron W.
"They handled a blackwater situation in our basement without making me feel like it was a bigger disaster than it was." — Lena G.
"Final bill matched the estimate to the dollar, which is rarer than it should be in this industry." — Sam O.
Most Selma dispatches are on-site within 60-90 minutes since our crews and equipment are based in-state, not flown or trucked in from elsewhere.
Upfront, written pricing is standard on every Selma job, not an add-on option.
Around-the-clock coverage in Selma includes extraction, drying, and Category 3 sewage response — nothing on that list waits for morning.
Yes, we document everything with photos and moisture readings and can communicate directly with your adjuster.
Dryness is confirmed with instrument readings against a documented dry standard, not just by feeling the wall or carpet.
We regularly handle sewage backups in Selma using full containment, PPE, and EPA-registered antimicrobial products.
Turn off the water supply if you can reach it safely, keep people and pets out of the flooded area, and don't run electrical devices near standing water.
Yes, we regularly respond to commercial and multi-unit losses in Selma, including retail, restaurants, and office space.
Typical drying time runs 3-5 days for a Selma home, though a job that sat unaddressed longer can take longer to fully dry.
Mold isn't inevitable, but the window to prevent it is narrow, which is why we treat speed as part of the Selma service, not an upsell.
We stand behind every Selma job with a documented dry-standard guarantee and a 30-day callback policy.
See the zip codes and nearby cities listed below — our Selma crews cover that full radius.
Selma is our home base, and our reach extends across Selma, TX through a network of staged equipment and on-call technicians. If your address falls inside or near Selma, a Hirex Water Damage crew can typically respond the same day.
— Embedded service-area map for Selma, Selma, TXCall now and speak with a real Selma dispatcher, not a national call center.
Call +1-844-234-5373